PowerPath/VE 5.9 Is GA!

Hi,

we have just relesed PowerPAth/VE (PP/VE) 5.9,

What Is EMC PowerPath/VE

image

PowerPath’s value fundamentally comes from its architecture and position in the I/O stack within the host.

Let’s look at that statement in three ways:

•At a first level, PowerPath sits above the HBA allowing heterogeneous support of operating systems and storage arrays.

•Next, by integrating with the I/O drivers, all I/Os run through PowerPath and allow for it to be a single I/O control and management point.

•Finally as shown here, PowerPath also sits below the application level, database level, and file system level. This combination allows it to be an infrastructure manageability and control point. Sitting below the host servers allows PowerPath to work with any raw devices, volume manager, or file system, and to be the basis for path management rather than just multipathing.

•The EMC PowerPath family includes PowerPath Multipathing for Windows, Linux, Solaris, HP-UX, and AIX physical environments, as well as Linux, AIX, and Solaris virtual environments, and PowerPath/VE Multipathing for VMware vSphere and Microsoft Hyper-V virtual environments.

PowerPath:

•Automates multipathing policies including failover and recovery—and to provide enhanced control

•Optimizes load balancing, eliminating cumbersome manual I/O load balancing.

•Grow without worrying about I/O flow and bottlenecks. Eliminate the impact of I/O failures on application availability and performance.

•Standardize path management. PowerPath applies the same tool set and patented algorithms across physical and virtual environments to reduce the number of tools necessary to optimize data paths. Additionally, with PowerPath Viewer, you can monitor all PowerPath-supported devices from a single pane of glass.

•Scale out mission critical applications.

this release is very interesting since it add support for 3 different arrays

1. The NEW VNX

2. XtremIO (Part of us ramping up toward GA)

3. NetApp (no, really!),  PowerPath/VE 5.9 for VMware vSphere    supports  NetApp FAS2240 storage array models only. ant other netapp array will require RPQ.

one of the most (if not THE most) common question is “why do i need PP/VE if VMware already provide multipathing, e.g Round Robin)

my answer was always and still is, PP/VE is not a must, if you are happy with RR, we fully support it, if you want something BETTER, than PP/VE is the best choice, here’s some comparison between the two

image

as always, you can request an eval by going to this URL:

https://emcinformation.com/75102/REG/.ashx?a_id=212022

Advertisements

2 comments

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s